Metalsmith Index of Instructional Articles
Last Update: July 27, 2010
French Creek Valley Home
Back to Blacksmithing
The Guild of Metalsmiths
Send us Your Feedback
Contact Us
Here is an index of instructional articles from the Guild of Metalsmith's Quarterly Magazine, The Metalsmith.
It is an alphabetical listing of over 880 articles.
These are only the articles which I felt had some instructional content.
Note that this "Metalsmith" is the magazine of "The Guild of Metalsmiths" which is a (mostly) blacksmithing
organization and NOT a goldsmithing organization!!!!
Through Volume 34 (2010) #2 (June)
Vol,#,Year,Name,Descr.(if needed),Page(s)
19 3 1995 Accurate Dimensions Gridding fancy pieces 13
24 2 2000 Acorn, The Making of 5,6
10 2 1986 Advice to Young Smiths F. Whitaker Tutorial 4-6
5 3 1981 Alchemist's Notebook Old & New Chemical Names 31,32
33 3 2009 Alloying Elements in Steel Major Elements 18,19
5 4 1981 Aluminum Alloys and Uses 15,16
29 4 2005 Aluminum Vessel, Forging an 26,27
11 2 1987 Anchoring to Concrete Heavy Duty Anchoring 10,11
17 2 1993 Angle Gage, Decorative 8,9
31 1 2007 Angle Grinder Safety 14,15
26 1 2002 Angle, Finding a 120 Degree 29
29 1 2005 Annealing Steel In Your Ash Bucket 20 - 21
34 2 2010 Anvil Bridge 12,13
23 1 1999 Anvil is a Great Tool, Your by Robb Gunter 20
16 4 1993 Anvil Mounting 18
27 4 2003 Anvil Protector 12
17 1 1993 Anvil Repair, More on 28
21 4 1997 Anvil Restoration 9&10
23 1 1999 Anvil Restoration by Robb Gunter 18&19
10 2 1986 Anvil Stand 15
11 4 1987 Anvil Stand Concrete 9
19 2 1995 Anvil Stand, Adjustable 18,19
16 4 1993 Anvil Swedge, BobPatricks 21
5 3 1981 Anvil, History of 23-24
34 1 2010 Anvil, Making an Anvil Sandwich 16,17
27 3 2003 Apple Roaster 18,19
4 4 1980 Apprenticeship, History 4
6 1 1982 Arc Welding, Basics 9,10
5 3 1981 Architectural Forging Hints & Tips 6
5 1 1981 Armor History & Howto 3-18
6 3 1980 Armor, a History Interview, Helmuth Nickel 11
3 4 1979 Art & Design, Basic One Approach to 4
25 1 2001 Art & Technique by Tom McCreight 9,10
7 2 1983 Art Fair Notice Rules for Selling 24
7 1 1983 Auto Engine Valves Source for Punches, etc. 20
33 4 2009 Axe, Forging one 22,23
34 1 2010 Axe, Forging, Commentary 6,7
5 3 1981 Babbit Pour For Trip Hammer Bearings 25-28
11 1 1987 Babbiting Advice 18
12 4 1988 Backyard Reduction/Iron Direct Reduction Process 17,18
16 3 1992 Balancing Toy 29
32 1 2008 Ball Finial, Twisted 23
19 2 1995 Bar Endings 16
8 1 1984 Barrel Hoops, How to Make 6
19 3 1995 Basic Shop Safety Rules 14 Rules 5
5 3 1981 Basics, The Good Basic Tutorial 9-17
14 2 1990 Baskets, Making 4,5
19 4 1995 Bell from flat stock 13
32 2 2008 Bell, Gna Gna 26
18 4 1994 Belt Grinder 20-22
33 3 2009 Belt Sander Tip 19
27 3 2003 Belt, Snap top Pop Can Ring tops&Leather 8,9
4 1 1980 Bench Shears Make Tin Snips into Shear 10
28 3 2004 Bending Fork from Vise Grips Adjustable 26
25 4 2001 Bending Fork, Hardy Hole 27
26 2 2002 Bending Fork, Hardy Hole 18
4 3 1980 Bending Jig 9
16 4 1993 Bending Jig Bender for Scrolls, etc. 6-8
16 3 1992 Bending Tools H Tool and Wrench 12,13
5 2 1981 Bezel, The Attaching Stones 8-12
3 5 1979 Bidri Metalwork Technique/India 4
26 4 2002 Bird, Angelo Bartolucci 27-29
23 3 1999 Blacksmithing Techniques By Beau Hickory 18
6 3 1980 Blacksmithing Tips Interview, F. Whitaker 12-22
13 1 1989 Blacksmith's Helper Note 9
21 1 1997 Blueing & Browning of Metals 24 - 26
33 4 2009 Bolt, Rivet & Rosettes How to make the heads 17-19
9 1 1985 Bolts, Decorative 7-9
19 2 1995 Bookend 16
20 3 1996 Bookend 11
17 1 1993 Bootscraper, Building a 29
15 1 1991 Bottle Opener 18
15 3 1991 Bottle Opener 10
23 1 1999 Bottle Opener 22
23 3 1999 Bottle Opener 29
32 3 2008 Bottle Opener By Al Olson 16-18
33 3 2009 Bottle Opener Horse Head Design 17
18 3 1994 Bough Bell 18
20 4 1996 Bowl Adzes History & Howto 36&37
27 4 2003 Braid, Faux Another Handle 18
28 3 2004 Braid, Faux Another Handle (dupl of 27-4) 8
15 1 1991 Brake, Power Hammer For Little Giant 17
26 4 2002 Branding Iron, a Miniature 9
5 4 1981 Brass & Bronze Forging 6
11 4 1987 Brasses, Forging of Tutorial 12-14
29 3 2005 Brazing Shop Tips 24
32 4 2008 Brian Gilbert's Creations 20,21
18 3 1994 Bridge Anvils History of 17
32 4 2008 Bridge Lamp Story, A 10,11
13 2 1989 Bronze Sculpture, Casting 12,13
5 2 1981 Bronze Work Mounting it 27
21 3 1997 Broom & Mop Holder Decorative Wall Hook 12
22 1 1998 B'smithing Study Guide How to Learn B'smithing 8&9
17 4 1993 Bsmith's Helper Shop Hint 23
18 1 1994 Buckskinner's Gear List and Howto 4,5
22 4 1998 Burns, Treating 7
31 1 2007 Business Cards 6-8
15 3 1991 Business Intelligence Commercial Survival 16-19
26 4 2002 Business of Blacksmithing, Basic Financial Principles 31,32
25 3 2001 Button Flower 27
23 2 1999 Cabinet Knob 21
12 3 1988 Cabinet Pull 15
28 3 2004 Calculating Forging Lengths 29,28
25 4 2001 Calipers, Creative 34
34 1 2010 Candle Chandelier Colonial 22,23
28 3 2004 Candle Cup Pliers 27
33 1 2009 Candle Cups, Forged Tom Latane' 8,9
20 2 1996 Candle Holder Making one 10
19 4 1995 Candle Holder, 15th Cent. 14&15
24 3 2000 Candle Holder, 15th Cent. 21,22
24 2 2000 Candle Holder, Prairie 4
27 1 2003 Candle Holder, Slavic 24,25
22 4 1998 Candle Holder, Spiral 15
18 1 1994 Candle Sconce 28,29
17 1 1993 Candlehldr, What,another? 22
24 4 2000 Candleholder, Holly Gary Scasbrick's 18,19
26 1 2002 Candlestand Ideas 30
25 3 2001 Candlestick, Pineapple Twist 18,19
28 4 2004 Candy Cane, Iron 26
18 2 1994 Captive Heart Tavern Puzzle 28
21 3 1997 Carbon Steel Quenching Secrets Basic Technical Info 22&23
20 3 1996 Carnation, Steel Design by Russ Vullo 28&29
28 4 2004 Caster Jack 9
23 1 1999 Celtic Cross 13
23 4 1999 Celtic Knot, How to Tie one 37,38
21 4 1997 Center Punches for Hot Cutting 26
22 4 1998 Centering Device, Precision Tal Harris Design 18
23 4 1999 Centering Device, Precision Tal Harris's design, Howto by Pete S 20
20 2 1996 Chandelier, forging Methods of Peter Sevin 12-14
19 3 1995 Chased & Chiseled Tool Design & Use 15&16
15 1 1991 Chasing Tools 8
13 1 1989 Cheese Cutter 20,21
19 4 1995 Cheese Cutter/Fork 16
14 4 1990 Chokers & Earings, Another Twist on 16,17
12 1 1988 Chop Saw Basics 5-7
27 4 2003 Christmas Bow Wreath Hanger 17
32 3 2008 Christmas Ornaments 26,27
5 4 1981 Chronology of Metals & Metalworking 3-5
3 4 1979 Circle Diameter Finding Circumference 2
23 1 1999 Circle Divider Divide circles into equal sections 25
25 2 2001 Circle Divider Pattern to photocopy 26
26 1 2002 Circle Divider 31
17 4 1993 Circle Maker 17
10 3 1986 Classic Neckband 12,13
14 2 1990 Clutch Facings, Replace on Old Style Little Giant 10,11
23 1 1999 Cnadle Stand Legs (Tripod) Ed Grove's approach 24
24 1 2000 Coal Fire, How to Start One 7,8
32 3 2008 Coat and Hat Hook 19
17 1 1993 Coat Hanger 26
15 4 1992 Coat Hook, F. Whitaker's Beginner's Project 21
23 1 1999 Coat Hooks, Octopus 21
8 4 1984 Coin Setting Two Sided Bezel 8-10
21 4 1997 Cold Chased Leaf 18&19
32 2 2008 Cold Chisel Cuts curves in Sheet Metal 21
16 2 1992 Cold Chisel, Coil Spring 22
11 4 1987 Cold Chisels Wotking with Them 18
7 1 1983 Collars, Shrinking 10
18 4 1994 Colonial Lamp Adj. Height Candle Holder 15-17
19 4 1995 Color Your World Put Patinas on Metal 12
18 2 1994 Colouring of Iron, The 29
3 2 1979 Competition at Events 3 Letters on Subject 7
8 3 1984 Contracts Outline for designing 3,4
4 2 1980 Contracts, Business The Bus'n of Art 5
15 2 1991 Conversion Listing Useful Shop Conversions 19
16 2 1992 Cool it! Coolant for Drill & Saw 30
5 4 1981 Copper Alloys Analysis and Use 7-9
7 2 1983 Copying Stand 14-17
31 1 2007 Copyright Law 17-19
24 1 2000 Cow Bell 25-29
19 3 1995 Craft Fair Stand, B'smith signs of a successful one 3&4
22 1 1998 Cross, an Open 21
16 2 1992 Cross, Christoh Friedrich Unfolding Cross Design 28,29
32 3 2008 Cross, Duke's A Christoff type cross 10-13
27 4 2003 Cross, Sawed 13,14
23 4 1999 Cruciform Candlestick 19
18 2 1994 Cup for Candles 31
17 1 1993 Cup Hook 14
6 3 1980 Cut-Steel Iron Jewelry History 10
15 3 1991 Cutter for Straight Lines Two "Pretty Good" Ones 9
13 4 1989 Cutting Patterns 5
11 4 1987 Cutting Tool for Hotstock 15
20 2 1996 Cymbidium Orchid Petal Patterns 20
33 3 2009 Damascus Steel, Cheap 23
9 1 1985 Damascus Steels History & Uses 13-18
23 3 1999 Damascus workshop notes A Bill Fiorini workshop 24,25
26 1 2002 Damascus, Bicycle Chain 25,26
33 2 2009 Damascus, Chain Saw Chain 16,17
16 4 1993 Damascus, How I Make 22
33 1 2009 Dating Antique B'smithed Items 15
26 1 2002 Decorative Details In Iron With Tom Latane' 4-8
19 2 1995 Decorative Rosettes 20
14 3 1990 Decorative Section for Balluster,Doorknocker 4,5
12 4 1988 Defining/ Inner Workspace Princ. Of Design 14,15
17 1 1993 Demo by Francis Whitaker Shop Tips 19-21
18 2 1994 Demo Hint 31
3 1 1979 Demo Info, Important 4
3 6 1979 Demo Info, Important 3
19 2 1995 Demo Items, David Fink's Short (15 Min or Less) 6-10
18 3 1994 Demo to the Public,How to 11
33 2 2009 Demonstrating Tips 15
32 3 2008 Demonstrating to the Public One Approach to 20,21
14 2 1990 Depth Stop for Post Vise 12
31 2 2007 Descaling and Pickling Using Vinegar 20
24 4 2000 Design Ideas, Ornamental Iron Notes and Pix by Bob Walsh 7-7
33 3 2009 Design of Triangluar Shapes Pomfret on Design 14,15
7 2 1983 Design, Approaching Ralated to Archit. Form 12,13
33 4 2009 Design, Tips on doing it 12
27 2 2003 Die Tips Tips on using them Open and closed dies 16
30 2 2006 Dish for Coins 18
31 2 2007 Dishing Anvil From Compressed Gas Tank 19
16 3 1992 Dishing Tool, A Quick 28
25 4 2001 Dividers, 3 Leaf Friction 32,33
29 3 2005 Dividing Circles 11
28 1 2004 Dog, Russian Scotty 10,11
13 3 1989 Door Handle 5
18 3 1994 Door Handle, Hand Forged 21-23
19 1 1995 Door Handle, Hand Forged 12,13
14 1 1990 Door Handle, with Twist 4
30 2 2006 Door Hardware Consideratons Tutorial 15-17
16 1 1992 Door Hardware & Railing Designs by Bob Walsh 12,13
15 3 1991 Door Knocker Tom Latane's Design 11-14
18 1 1994 Door Knocker 10-13
26 3 2002 Door Knocker 15
31 2 2007 Door Knocker Fleur de Lis 12-14
11 1 1987 Door Knocker handle 6,7
11 2 1987 Door Knocker, Completed 6
25 3 2001 Door Knocker, Rose 13,14
17 3 1993 Door Latch, Making, 1820s 6-9
22 4 1998 Door Stop Wedge 11&12
30 1 2006 Dragon Head Key Chain 23,24
16 2 1992 Dragon, Another? 24-27
27 3 2003 Dragon, Feet for 16
13 3 1989 Dragonhead, Making a 14-16
15 2 1991 Drawer Pulls, Decorative 8
19 2 1995 Drawing Tips & Terms Notes on Shop Drawing 15
14 1 1990 Drawing to Length Stop for Power Hammer 9
22 2 1998 Drawing, Part of the Chain Why Communicate with Drawings 10-12
20 4 1996 Drilling Big Holes Freehand Drilling, >1/2" 10-12
25 3 2001 Drilling Holes 12
11 1 1987 Drilling Through Holes Shop Tip 17
7 1 1983 Drilling, Hard Materials Getting Bit to Start 10
7 1 1983 Drilling, Pilot Size 10
7 1 1983 Drills, Cutting Speeds 5
12 1 1988 Early Amer. PrimitiveHdwr Tips when Reproducing 22
18 4 1994 Easy end for a bar more than a taper 6
27 1 2003 Electric Drills, Power handles for 23
25 3 2001 Elephant Head Utensil Handle 24
14 1 1990 Engraver's Primer 26-28
13 3 1989 Escutcheon, square 4
19 2 1995 Eskimo's SealSkin'gKnife 21
14 2 1990 Estimate Material Lengths How to Use Charts 14,15
14 1 1990 Estimate Mat'l Lengths Tutorial with Examples 12-14
7 1 1983 Estimating a Job 3-8
24 1 2000 Estimating a Job Update by Bob Walsh 9-14
31 2 2007 Etching Copper 16
18 4 1994 Etching Damascus Steel 11
15 4 1992 Experimental OilFiredFurn Melt Aluminum or CastIron 9
29 2 2005 Eye Punch for Animal Heads With Pupil, Monte Bygd's 16 - 18
27 2 2003 Eye Punch, Making one 21
6 4 1982 Eyes & Vitamins Health Tip 3
29 1 2005 Fabricated Ball Stakes for Repousse' 23
10 1 1986 Fasteners, Facts About 10
23 2 1999 Feather, Making one 26
25 3 2001 Fern Leaf, A Walt Scadden 28
30 1 2006 File or Rasp Projects 17
13 2 1989 File tips 5
26 4 2002 Files, Using them 36,37
13 4 1989 Filing Important Notes 5
6 4 1982 Filter Shades 9,10
18 2 1994 Fine finishes 30
8 1 1984 Fininshing Ends of Metal 5
26 3 2002 Finish for Metal Dr.Brown's Love Butter 21-23
18 4 1994 Finish, A Traditional 13
27 4 2003 Finish, Metal, Indoor Mindy Gardner 9
33 1 2009 Finishes for Metal 18-20
18 2 1994 Finishes for Metalwork 32
7 1 1983 Finishes, for Iron, Dip finish 27
13 2 1989 Finishes, Metal 16-18
3 6 1979 Finishing Formulae, Ferro 2
12 3 1988 Finishing Formulas, Ferro 32
30 2 2006 Finishing Techniques 19
26 2 2002 Fire Management Tips 27
17 3 1993 Fire Pot, Fabricated 10,11
30 1 2006 Fire, Getting it Started 25-27
18 3 1994 Fireplace shovel 12-16
22 4 1998 Fireplace Shovel Design, Simple 14
2 3 1978 Firepot, Welded up 8
23 3 1999 Firescale Removal Tip 29
15 2 1991 Floral Rivet 9
21 3 1997 Florentine Leaf Forging method 14&14
23 3 1999 Flower Form Making a forged flower 16,17
27 3 2003 Flower from pipe Lorelei Sims 6
16 2 1992 Flower Making Iris,Lilly,Generic 13-15
22 2 1998 Flower Pattern Billet Short explanation 13&14
10 3 1986 Flower, 6 Petal Ironwork 5
26 4 2002 Flower, Angelo B artoluccio 26
22 2 1998 Flower, Copper by Don Neuenschwander 27&28
19 3 1995 Flower, Echos of the Ring Pattern for flower parts 11
18 3 1994 Flower, Forged, 5 Petals 19,20
10 3 1986 Flower, forging a In German, w/PIX 16
18 3 1994 Flower, Little 21
12 3 1988 Flower, Long Stem 14
22 2 1998 Flower, One piece Heiner Zimmerman's design 15
21 2 1997 Flowers Hints for Making 24 - 26
20 2 1996 Fluting Fuller Making one 16
7 1 1983 Flux, Forge Welding Make Your Own 20
30 1 2006 Fly Press, an experimental Shop-Built 18-20
26 4 2002 Flypress, Notes on 13-15
23 2 1999 Forge a Tree 20
16 3 1992 Forge and Bellows Design Fort Snelling&Williamsb'g 9
10 2 1986 Forge Blower, 12 Volt 17
13 3 1989 Forge Blower, Home Style 17
12 2 1988 Forge Design, Firepot Air Cooled 13
16 3 1992 Forge Furnace Combustion Facts about furnaces 26,27
9 3 1985 Forge Pot, a Great Dimensions for 4
26 3 2002 Forge Scale, Removing 11,12
16 1 1992 Forge Selection Basics 16-18
9 2 1985 Forge Welding Aid Face shield 11
23 4 1999 Forge Welding Article 3 The Basics 27-31
23 2 1999 Forge Welding, It's Strictly Business The Basics 10,11
23 3 1999 Forge Welding, More on the Basics 35-37
31 1 2007 Forge Welds don't Stick, Why? 10 Reasons Why they don't 21
10 3 1986 Forge, Basic Propane 9
15 2 1991 Forge, Clinker-Free 22
8 3 1984 forge, Hoodless 5,6
10 3 1986 Forge, Hoodless A "Smokeless" Hood 8
29 4 2005 Forge, Junkyard, Another 23
7 2 1983 Forge, Modern, Coke, #9 11
22 1 1998 Forge, My $30 a Smith-Built Forge 15
11 1 1987 Forges, Gas versus Coal Discussion of Merits 12-14
29 4 2005 Forges, Junkyard 22
9 4 1985 Forges, Thoughts on 5
20 4 1996 Forging a 6ft Scotty Dog 21&22
21 3 1997 Forging a Frog 26&27
21 1 1997 Forging Artwork in Iron Design Process & Phil. 18 - 19
17 3 1993 Forging Math 31
26 2 2002 Forging Notes for Non-Ferrous Metals 19,20
25 1 2001 Forging Wrought Iron While maintaining joint strength 21
22 3 1998 Fork by Peter Ross 18
29 4 2005 Fork and Spatula, Colonial 24,25
14 4 1990 Fork, Early American by Peter Ross 18,19
31 2 2007 Fork, Toasting 6,7
32 2 2008 Fork, Toasting, Cool Hand 17
11 3 1987 Foundry Furnace, Gas 19
34 1 2010 Fountain, Sunflower 28
21 3 1997 Four Armed Shepard's Hooks 25
23 1 1999 Frame Joint 16
27 3 2003 Frog-making tools Eye, toe & fuller 5
27 3 2003 Frog---on the end of a 1" Sq. Bar 4
26 3 2002 Fuller for hardy Hole Shop tip 17
23 4 1999 Fullers from cheap Hammers Shop note 24
22 1 1998 Garden Stakes Making a 2 loop 19
15 1 1991 Gas Forge Burner Update 9
29 4 2005 Gas Forge Insulation Repair 23
28 2 2004 Gas Forge Plans Hans Peot style 20,21
26 1 2002 Gas Forge, A Proven Design That You Can Build 13-17
9 2 1985 Gate Heel, Forging a 6,7
17 1 1993 Gate, Laying out a 18
23 2 1999 Getting The Most From Guild Wkshps 4
17 4 1993 Glossary of B'smith tools 27
4 1 1980 Gold Facts Gold Analysis & Markings 9
15 2 1991 Good Design, What is it? 3-7
24 4 2000 Grants, from Guild of Metalsmiths How to get one 20,21
5 4 1981 Granulating a Ball 17,18
23 3 1999 Grave marker, making one 15
18 2 1994 Grey Patina of steel 30
16 3 1992 Grill,FireTools& Lamp From Walsh Forge & Fndry 6,7
3 3 1979 Grinder, High Speed, Hand 6
34 1 2010 Grinding, Safety Tips 24
10 1 1986 Hammer & Set Tool Handles Fitting them 13,14
17 2 1993 Hammer & Tongs Bio of a Bsmith 19-21
33 4 2009 Hammer Control 14-16
26 3 2002 Hammer Control, An Exercise 27,28
10 1 1986 Hammer Eyes Theory and Practice 5,6
9 3 1985 Hammer Eyes, Drilled 13
9 3 1985 Hammer Handles Fitting 12
23 3 1999 Hammer Head, Robb Gunter's making one 21
25 2 2001 Hammer Techniques, Improving Forging Butter/Tuckerd Tapering? 15,16
32 2 2008 Hammer, Ball Peen, Using one 24
20 2 1996 Hammer, how to hold Response to previous art. 4&5
20 1 1996 Hammer, how to hold & use 10&11
11 4 1987 Hammer, How to Temper 9
24 2 2000 Hammer, The Mysterious Dynamics of Using the Hammer 9-12
32 4 2008 Hammer, Where to put the eye? To balance it 22
8 2 1984 Hammers Put a handle on it! 13,14
4 7 1980 Hammers & Hammer Handles Tuning Up Your Hammers 7
8 3 1984 Hammers, Custom Ball Peens to Other Uses 2
16 2 1992 Handle, Braided, The 23
13 2 1989 Handle, Cassone,N.Italian Chest Handle 8
33 1 2009 Handle, Chain Braid 24,25
16 3 1992 Hardie Tool, For RndStock 13
15 2 1991 Hardy & Struck Tool Ident 23
17 3 1993 Hardy Hole, Bsmiths Tools for use in 14,15
25 2 2001 Hardy, Hot Cut How to make one 22-25
25 4 2001 Hardy, Hot Cut 24-26
18 2 1994 Harmonic Proportion 18-21
25 1 2001 Head, Time to forge a by Tom Latane' 6,7
7 2 1983 Health Hazards Related to Cutting/Weld'g 18-21
15 3 1991 Heart Hook For Beginners 25
17 1 1993 Heart Hook 24
30 4 2006 Heart Hook 15-18
19 2 1995 Heart Meat Fork 17
19 2 1995 Heart Puzzle Tavern Puzzle 22
15 4 1992 Hearts Heart Handle 24,25
26 1 2002 Heat Treating 12
12 3 1988 Heat Treating Hammers 13
27 1 2003 Heat Treating in Gas &Coal Forge One Approach 22
25 3 2001 Heat Treating Tool Steels 20-23
12 1 1988 Heating Heads, Misuse of Safety Issue/RosebudTorch 25
26 3 2002 Heel Tenon Use & Process 16,17
26 4 2002 Heel Tenon, Tools for 19,20
17 1 1993 Helmet! Special Welding Helmet 12
27 2 2003 Hinge Eye, Forming a Forge welded, Peter Ross 7
27 3 2003 Hinge Project, Tom Latane' Notes on How-to 7
15 1 1991 Hinge, Dovetail by Peter Ross 10,12
9 1 1985 Hinge, Gate, Improvement F.Whitaker 5
25 1 2001 Hinge, Offest-T Shutter 22-24
26 3 2002 Hinge, Scroll/Pintel 13,14
8 4 1984 Hinges Friction Free Design 6,7
18 2 1994 Hinges&Hasps of the 1820s 5-11
12 3 1988 Hinges, 16th & 17th Cent. Drawings 17-21
12 4 1988 Hinges, 16th & 17th Cent. Drawings 22
10 3 1986 Hinges, Dovetail 6,7
15 2 1991 Hinges, What Type IS That 15
33 2 2009 Hoe, Hand Forged 4
11 4 1987 Hold Down, for Anvil 9
15 2 1991 Hold Fast /Anvil w/o Pritchel Hole 14
4 2 1980 Holdfast 10
27 4 2003 Hook-Making Jig Adjustable 19
4 3 1980 Hooks, Beam, Forming Jig 9
32 3 2008 Horizontal Drill Making one 21
12 4 1988 Horse Head, Forging a 8
9 4 1985 Horse-Nail Trade A Short History of 6,7
15 2 1991 Hot Cutter 11
14 2 1990 Hot Iron Information Decoding Steel Types 19
4 5 1980 Hot Twisting Water Bottle for 12
25 2 2001 Hot vs Cold Rolled Steel Howto decide which one to use 5,6
6 2 1982 Improved Tool design Tune up your purch. Tools 8-10
32 4 2008 Incising Tool 23
24 4 2000 Instructing, notes on how to become one by Pete Stanaitis 10,11
25 2 2001 Iron & Steel, a Brief History by Hans Peot 11-14
20 3 1996 Iron Log Holder The making of one 8&9
26 2 2002 Iron Making & B'smith-IvoryCoast Using Ancient Methods 16,17
5 1 1981 Iron Pour Basic Process Explained 2
32 2 2008 Iron Work Finish, Oven-Baked 16
6 3 1980 Jewelry, Iron History of 9
22 4 1998 Jig, Multi-Purpose Hardy Tool Holder 17
24 2 2000 Jonquill, Dorothy Stiegler's With Patterns 23,25
13 2 1989 Just a Little Scaling Fish on a Hook 6,7
28 1 2004 Key Class, a Renaissance Tom Latane outline 21-26
18 4 1994 Key Ring 11
9 3 1985 Keys, New, for Old Locks 6-8
25 1 2001 Kitchen Cookin Kitchen Utensils 18,19
18 2 1994 Kitchen Utensil Hanger 22
14 2 1990 Knife Blades Simplified Steel types Discussed 13,14
25 1 2001 Knife from RR spike 20
12 3 1988 Knife Grinding Fixture For Miniature Knives 14
23 1 1999 Knife Maker's Vise 23
25 2 2001 Knife, File Making a knife from a file 18,19
14 1 1990 Knob, Forged and Chased 5
20 2 1996 Knot Tying Jig 15
13 3 1989 Ladies' Purse hanger 17
30 2 2006 Ladles & Spatulas, Making & Design, Tutorial 27-29
29 3 2005 Lady Slipper, the Yellow Bill Krawczeski's 16 - 20
5 4 1981 Lantern, Coppersmithing a 10-14
13 2 1989 Latch, Chest 9
22 1 1998 Leaf Collar 18
32 2 2008 Leaf Hammer 21
3 3 1979 Leaf Jig, Raised Veins 1
32 2 2008 Leaf Making 18-20
24 3 2000 Leaf, A Simple by George Dixon 9
12 3 1988 Leaf, Bold, Forging a From a Railroad Spike 6,7
32 2 2008 Leaf, Little Gum 25
32 2 2008 Leaf, Water 23
26 3 2002 Leather Apron, the Blacksmiths Safety First 26
29 3 2005 Leaves, Several Realistic Designs 21
20 1 1996 Leg Vise Repair Repair Leg Vise 4&5
16 2 1992 Letter Opener From Re-Rod 10
17 3 1993 Letter Openers, Practical 26,27
7 2 1983 Light Box Making & Using a 8-10
20 2 1996 Lillies Jigs & Processes 17-19
21 1 1997 Little Giant Drive Sys. Brake & Power switching 8 - 11
7 1 1983 Little Giant Material Power Hammer Info 11-15
28 4 2004 Lock, Antique, Design and Glossary by Tom Latane' 4 - 8
33 4 2009 Log Tongs, Miniature 24-26
30 4 2006 Magazine hole drilling, 3 Hole Drill 14
17 3 1993 Major Forging Operations B'smith'g Basic 5
29 1 2005 Manipulated Lines 27
19 3 1995 Maple Leaf Repousse' Leaf 10
22 1 1998 Match Holder W/Match Stretcher 20
13 4 1989 Material Selection Advice 14,15
19 1 1995 Mat'l Choices/Pat.Welding 14
16 2 1992 Mat'ls for PatternWelding 9
26 4 2002 Measured Square Rectangle Layout Aid 10
28 4 2004 Measuring Tool, an Anvil Magnet 27
15 4 1992 Metal Bead Making 17-19
7 3 1983 Metal Finishes, Grandad's New Names for Old Terms 15,16
18 2 1994 Metallurgy/Spark Patterns 23-24
15 4 1992 Metalworking Tips Many Tips & Projects 20
29 4 2005 Miner's Lamp 4 - 7
21 4 1997 Mini Swage Block Cut from Thick Steel Plate 20
18 4 1994 Miniature Hatchet 8
3 3 1979 Mokume' History & Construction 3
22 4 1998 Mosquito 16
28 2 2004 Mule, Wild-Eyed 16-18
31 2 2007 Museum Wax Finish How to make and use 21
27 1 2003 Mussel Pot Pot for cooking Mussels 16,17
5 4 1981 My Life & Work by Carol Sakowski 21,22
31 4 2007 Nail Making Jay Close 19
18 2 1994 Nails 34
18 2 1994 Nails, cut & smelted Info on nail hist & mfg 33
7 1 1983 Nails, Rose Head Making & Using 19
Volume Num Year Name Description Page(s)
22 2 1998 Napkin Holder Beginner's project 16
22 3 1998 Napkin Ring An exercise in drawing out 17
11 1 1987 Necklace, Choker Semi-Flexible 8-11
12 4 1988 New Design Thru Discovery 11,12
2 3 1978 Niello Metal Decoration Method 7
4 3 1980 Nitric Acid Testing Gold & Silver 10
18 4 1994 No Splitting headaches Splitting bars accurately 7
20 4 1996 Norwegian Knife Blade 25&26
16 4 1993 Old Files & New Knives 23-25
21 4 1997 Ornamental Screw Heads 26
34 2 2010 Oven Tool Push Me, Pull Me 8,9
25 3 2001 Owl, Barn 26
5 2 1981 Oxidation 13
6 4 1982 Oxy-Acetylene Safety 7
8 1 1984 Painting, with Spray Cans 4
11 2 1987 Painting/Spray Cans 10
20 4 1996 Paper Towel Holder 30
24 2 2000 Paper Towel Holder 26
28 4 2004 Passivating Stainless Steel 22, 23
28 3 2004 Patina on Steel James Vista 24,25
22 4 1998 Patinas A couple of options 20
29 1 2005 Patinas, The Art of 2 - 7
19 3 1995 Pattern Welded FerrousMtl by william R. Fiorini 6-9
14 3 1990 Patterns from Channel Using 1 1/2" X 1/2" Mat'l 18
25 2 2001 Patterns, Developing Accurate by George Dixon 21
7 1 1983 Perforating Sheet Steel 9
5 2 1981 Pewter History & Uses 23
26 2 2002 Pewter, Welding 14,15
28 2 2004 Phase Converter, single to 3 phase Hans Peot 22,23
28 3 2004 Photographing Iron, ABC's of 23
4 2 1980 Photographing Your Work 3
27 4 2003 Photography Studio On your Kitchen Table 16
24 2 2000 Picket Decoration, Contemporary by George Dixon 13
32 1 2008 Picket Sizing Jig 21
21 4 1997 Picket Spacing for Gates 27
23 2 1999 Picket Spacing for Railings How to Figure 33,34
32 1 2008 Picket Spacing, Solving Problems 20,21
34 1 2010 Picket, Forged 26
17 4 1993 Piercing Iron, AgeOldMeth 3
32 3 2008 Pine Cone Ornament 22-25
25 2 2001 Pinecone, Deke Wedow's 17
30 1 2006 Pinecone, One Way to Make 6,7
25 1 2001 Pinnacle w/Crockets by Tom Latane' 4,5
15 4 1992 Pizza Cutter 11
14 4 1990 Plan /Work,Work Your Plan Design Process Tutorial 13-15
24 2 2000 Plant Hangers for Deck Rail 16
16 1 1992 Plate & Bowl Making 4-9
20 1 1996 Plate Hanger Beginner's project 17
30 4 2006 Platform Rocker Hardware Replacing 3
14 4 1990 Pliers, Box Joint by Peter Ross 20,21
31 3 2007 Pneumatic Rivet Hammer Basics 4-6
24 4 2000 Pod Motiff, Forged by Loerna Babcock Moore 36,37
4 5 1980 Poisher, Home Made 13,14
24 1 2000 Poker for the Forge 23,24
25 3 2001 Poker Handle, Heart Shaped 25
3 5 1979 Poker with Basket Handle 6
27 3 2003 Poker, Fire, with braided handles 21
17 2 1993 Porch Railings, Welded 24,25
20 3 1996 Portable Hardy Hole Making one 22&23
31 2 2007 Post Anvil 19
5 1 1981 Post Vise Stand 19
34 1 2010 Post Vise Tip Add a Throwout Bearing 25
11 3 1987 Pot & Pan Hanger Beginner's Project 12,13
16 4 1993 Power Hammer Brakes 14,15
25 1 2001 Power Hammer Brakes by Clifton Ralph 14,15
22 3 1998 Power hammer Die Types 13
26 2 2002 Power Hammer Dies, Hand Held Making & Using 6-13
16 4 1993 Power Hammer Dies, Welded 9,10
11 3 1987 Power Hammer Forging 10,11
22 3 1998 Power Hammer Safety 14
13 3 1989 Power Hammer Toe Switch 9
18 4 1994 Power hammer Tooling Die system 4-5,19
22 4 1998 Power Hammer Tune up Hammer not hitting hard? 6
22 3 1998 Power Hammer Use 15&16
18 3 1994 Power Hammer, Die Keys 24-26
8 4 1984 Power Hammer, How to Make Brtish Treadle Design 12,13
11 1 1987 Power Hammer, Low Bucks Build Your Own 4,5
11 4 1987 Power Hammer/run too Fast Why, and what to do 16,17
21 4 1997 Poz-Tongs 12&13
29 2 2005 Poz-Tongs by Rob Gunter Revised by Monte Bygd 19 - 21
3 6 1979 Practical Designing For the Part-Time Bsmith 5
13 4 1989 Principles of Design Phi,GoldenRect.,Fibonacci 12-14
28 3 2004 Project Visualization for the blacksmith 16-19
22 3 1998 Propane Forge Safety by Bruce Freeman 25-28
17 2 1993 Propane Instead of Acet. Why use Propane? 11
28 3 2004 Propane Tanks, method of refueling 20-22
6 4 1982 Public Demo Safety Safe Demonstrations 5
15 4 1992 Punch, Two Headed 4
23 4 1999 Punches from Ball Peen Hanmers Shop Note 24
31 1 2007 Punches Stick, Why? 10 Reasons Why they do 21
10 1 1986 Punches, Chasing Shape and Designs 3
14 2 1990 Punches,Chisels&tempering 16-18
23 4 1999 Quatrefoil How to make 21-23
14 3 1990 Quatrefoil Display Panel Shows Steps to Produce 11
17 3 1993 Quatrefoil, A Yellinesque 24
18 1 1994 Quatrefoil, Yellinesque 7-9
33 1 2009 Quench Recipe Old -time 15
19 4 1995 Quick Rust Rust a piece in two days 11
32 4 2008 Quilt Racks 24,25
11 3 1987 Radius Gages, Home Made 23
24 3 2000 Railing Component for Bridge Key Motiff, by Tom Latane' 12-14
8 1 1984 Railings How 1 Project Worked Out 8,9
9 2 1985 Railings & Tenons 4,5
8 1 1984 Railings, How To Lay Out 14
8 2 1984 Railings, Lay Out Info 7
8 1 1984 Railings, Special Cement Expanding Cement Source 14
16 4 1993 Railroad Spike WoodChisel 11
9 2 1985 Raising Stump 12
20 3 1996 Ram's Head, No Weld 25
24 2 2000 Rattail Hinges and Tooling How to Make Both 14,15
14 1 1990 Rattle,Baby,Silver,Create 20-23
13 2 1989 Record Keeping for Economic Survival 28,29
18 3 1994 Removeable Hardy Hole Treadle Hammer Hardy Tool 4,5
13 4 1989 Removing Scale 5
29 1 2005 Repousse' Basics 24 - 26
24 3 2000 Repousse' on Mild Steel 4-7
13 3 1989 Repousse' Project, A 6,7
4 3 1980 Reticulation A Texturing Process 10
32 2 2008 Ribbon Burner Fabrication Notes 10,11
30 2 2006 Ribbon Burner, Building a 22-24
27 4 2003 Ring Christmas Bow 15
20 3 1996 Ring Roller How to make one 21
4 2 1980 Ring, Resizing a 9
7 1 1983 Rings, Resizing Without Removing Stone 20
3 2 1979 Rivet Cutter 1
19 3 1995 Riveting Tips 12&13
6 2 1982 Rivets & Rivet Sets How to Make Them 17
12 1 1988 Rooster Making one 23,23
13 1 1989 Rope Border Die 22
21 2 1997 Rose Door Knocker Making one 13&14
25 1 2001 Rose, a Railroad From a Railroad Spike 16,17
25 3 2001 Rose, A Walt Scadden 27,28
13 2 1989 Rose, Metal, Making 10,11
24 4 2000 Rose, One Piece by George Dixon 12-16
11 2 1987 Rosebud in Iron, Making 9
19 1 1995 Rosette Tool Stamp and Die 3
12 4 1988 Rosettes for disguising Bolt heads 21
11 2 1987 Rosettes/ Governor's Mans Making Stamp & Fitting 7
26 4 2002 Rust Finish for Steel 11,12
17 2 1993 Rust Removal 13
31 1 2007 Rust Removal with Molasses Why does it work? 5
23 4 1999 Rusting It Recipes Gleaned from The Internet 25,26
17 4 1993 S-1,Cutting Edge Tool Steel Why use it&Where/get it 14
6 4 1982 Safety for Gas Cylinders 6
6 4 1982 Safety Glassess 8
18 2 1994 Safety Hint Care of Flammables 31
3 1 1979 Safety/Chemicals 24 Dangerous Compounds 5
7 1 1983 Sandpaper, Folding 10
12 1 1988 Scaling, Avoiding While Heat Treating Steel 21
10 1 1986 Scarf, God's Own 17
16 3 1992 Scribe, Inexpensive How to make 5
5 2 1981 Scrimshaw Basic Tutorial 14
23 3 1999 Scroll Forming Jig making one 20
23 3 1999 Scroll Jig, Edge Bent Scrolls making the jig & using it 22,23
7 2 1983 Scroll Jigs 7
20 3 1996 Scroll Making, an intro 24
24 3 2000 Scroll Templates by George Dixon 10
18 1 1994 Scroll Wrenches 20
30 1 2006 Scroll, Bevelled How to Make 21,22
24 3 2000 Scroll, Button by Walt Scadden 24
17 2 1993 Scroll, How to Draw 21
24 3 2000 Scroll, the by George Dixon 8
18 1 1994 Scrolls 17-19
18 1 1994 Scrolls & Scrollwork Design info 15,16
24 2 2000 Scrolls, Intermingled 17
12 3 1988 Scrolls, Making & Fixing 12
26 4 2002 Scuplture Design 4-8
21 1 1997 See Them Tumbling down Basics of Tumbling 12 - 17
4 7 1980 Set Hammers Tutorial 13
21 2 1997 Sharpening Twist Drills Theory & Practice 15 - 17
15 4 1992 Shear Ingenuity Stock shearing Tool 4
6 1 1982 Shear, Sheetmetal 16
21 2 1997 Sheet Metal Brakes Making and Using 8&9
26 1 2002 Sheet Metal Details The Altoids Project 18-24
12 2 1988 Shim Stock Source 9
10 1 1986 Shop Equip & Practices for the Beginning Smith 11,12
19 1 1995 Shop Math Calculator 15
4 2 1980 Shop Rental, Perils of 7
17 1 1993 Shop Safety,Basic Rules 6,7
11 1 1987 Shop Table How to Make 16
5 3 1981 Shop Talk Suggested Tooling & Tips 7,8
17 1 1993 Shop Tips Various tips 12,13
25 1 2001 Shop tips, earplugs, etc. by Tom Latnae' 8
14 3 1990 Shop, Bsmith,Layout & Org Pete's shop 14-16
19 1 1995 Shop, Making a B'smith How a member did it 7,8
14 4 1990 Shop, My Bob Fredell's Shop 6-8
15 1 1991 Shop, Tom's Tom Latnae's temp. Shop 4-6
20 3 1996 Shovel, One Piece Demo by Jerry Darnell 26&27
26 3 2002 Shutterdog, Reproducing a Charleston 24,25
11 3 1987 Signs, DecorativeIronwork 8,9
6 2 1982 Silver History & Uses 3
20 1 1996 Silver Needle Case Tips on Making One 6
13 3 1989 Silver Pencils are in/Tip 9
11 2 1987 Silver Rings, Forming 8
6 2 1982 Silver Soldering 7
4 6 1980 Silver Spoon, Making a 7,8
6 2 1982 Silver Surface Textures 15,16
6 2 1982 Silver Wire Inlays In steel 5,6
6 2 1982 Silver-Copper Alloys Several Alloys Defined 4
26 1 2002 Silverware Scrap Design 10,11
25 4 2001 Sky Hook for Christmas Stocking 13
25 3 2001 Slimy Snail 25,26
12 1 1988 Slitting Chisel For Hammer head 12
14 1 1990 Small Pieces, Handling 23
27 1 2003 Smelting Iron With a Viking Era Furnace 4,5
16 4 1993 Smithin' Magician, The 19-21
4 2 1980 Smith's Helper From a Vise-Grip Plier 10
4 6 1980 Smith's Helper 10
14 4 1990 Snarling Iron Ollie's 8
29 3 2005 Snub End Scroll Peter Ross's 23
18 2 1994 Soap Quench Hardening mild steel 30
8 2 1984 Spark Test 16
22 2 1998 Spatula by Peter Ross 17&18
25 1 2001 Spatula, From Spring Fuller to Making both Spatula & Spr.Fuller 10
22 1 1998 Spiral Finial One Way to Make 12&13
24 1 2000 Spiral Finial, One Way to Make it 18,19
22 3 1998 Spirals, Constructing 9-12
15 1 1991 Splitter, Adjustable 11
7 1 1983 Spray Can Tip Getting All the Paint 25
31 1 2007 Spring Steel Tools Crack, Why? 10 Reasons Why they do 21
21 2 1997 Springs Making Flat Springs 10 &11
23 3 1999 Spurs, Western Riding How to make 4-5
26 2 2002 Square (Corners)Made Easy 30
23 3 1999 Square Collared Corners How to make 38
25 2 2001 Square Holes, Making a Punch and die for 7-9
21 4 1997 Square Knot Samuel Yellin Style 21
22 1 1998 Square Knot 14
27 3 2003 Square Knot 17
5 2 1981 Stainles Steel Sculpture How One Was Made, Tips 9-11
8 2 1984 Stair Banisters Design & Fabrication of 9-11
12 1 1988 Stairways, Curved Taking out the Problems 17,19
15 2 1991 Stamp Chasing Notes from Workshop 10,11
15 2 1991 Steel Numbering What do those #s Mean? 16-18
12 4 1988 Steel Uses/Carbon Content Table of Information 20
3 2 1979 Stone, Natural/Sharpening 8
23 2 1999 Stone-n-Steel Preparing Stone for use w/ironwork 14,15
14 1 1990 Straightening Wire Make it Really Straight 23
10 1 1986 Striking 16
23 3 1999 Super Quench Update Adjusted for change in "Dawn" soap 19
24 4 2000 Swan, Forging a by Burke Hobba, Queensland,AU 30
24 3 2000 Swan, making the Zimmerman 18
32 1 2008 Swans, several techniques 6-10
25 4 2001 Swedge, Anvil, Bob Patrick's 27
26 2 2002 Swedge, Anvil, Bob Patrick's 18
25 4 2001 Sword, Forging a Katana 15-23
3 6 1979 Table Legs How to Hold While Forging 5
25 1 2001 Table-the process Making them by Dave Mariette 11-13
18 4 1994 Tal's Music Stand 18
27 3 2003 Tapping holes, some basic tips 14,15
27 4 2003 Tapping Tips, continued Where to begin 23
33 3 2009 Tatara Steel Making 6-8
10 2 1986 Tavern Puzzle Designs 7,8
4 2 1980 Tee Weld, How to 10
4 3 1980 Tee Weld, More on 17
10 2 1986 Temper Color Chart 16
18 4 1994 Tempering Solution 13
23 3 1999 Tendonitis/Tennis Elbow Info Medical Advice to Avoid Problems 30,31
31 2 2007 Tenon Forging Tables Calculate Tenon Lengths 26,27
4 2 1980 Tenon Jig For Hardy Hole 9
3 7 1979 Tenon Making Tools & Techniques for 7
5 1 1981 Tenon Making 21
16 3 1992 Tenon, Can I have your(a) Making mortise&Tenon jnts 8
11 1 1987 Three-Legged, Measuring Shop Tip 14
13 4 1989 Thumb Latch 3,4
9 4 1985 Tin Roof, Building a 10-15
23 1 1999 Tinning of Copper Kitchenware 27
24 1 2000 Tinsmithing Basic Introduction 5,6
28 4 2004 Tips for Blacksmiths 24,25
17 1 1993 Tips From Hans Peot 11
22 1 1998 Tips/ Wkg Around Anvils Setting up your Shop 16
19 1 1995 Tomahawk 5,6
12 4 1988 Tomahawk, Railroad spike 25
33 1 2009 Tong Clip, Adjustable And others 16,17
33 3 2009 Tong Demonstration How-To make them 24,25
22 3 1998 Tong Handle Clip 16
24 3 2000 Tong Rack Doug Cout's Possum Trot Rack 23
14 3 1990 Tongs Tutorial & Identification 19-21
13 3 1989 Tongs, Box, etc.. 21,22
25 3 2001 Tongs, for holding Chisels 16,17
32 2 2008 Tongs, Forging on Power Hammer 14,15
9 4 1985 Tongs, Making 17
22 1 1998 Tongs, Quick 17
9 3 1985 Tongs, Versatile From Vise Grip 10,11
17 2 1993 Tongs, Your first 17
23 2 1999 Tool Box from Scavenged Materials 22
23 1 1999 Tool Holder How to Make one 12
31 3 2007 Tool Holder For Struck Tools 7
18 3 1994 Tool Making, Ned Nelson 28-30
34 1 2010 Tool Shapes & Applications George Dixon Style 18-21
10 1 1986 Tool Steel Unravelling the Mystery 7-10
24 2 2000 Tool Steel Basics by Robb Gunter 7,8
17 3 1993 Tools From the Junkyard 25
18 1 1994 Torch Fixture 21
33 1 2009 Touch Mark 21-23
21 1 1997 Traditional Joinery Mortise & Tenon Joinery 22 - 23
19 2 1995 TraditionalEuroTechniques Decorative Rivets/Bars 13,14
20 3 1996 Train the Trainer Wkshop How to train Bsmith trnrs 10&11
19 2 1995 Trammel Hook, Adjustable 11,12
20 1 1996 Trammel Hook, Adjustable Making one 14&15
16 2 1992 Traveler, 12" Circum. 19
21 4 1997 Treadle Hammer Perspectives Clay Spencer, Use & Tooling 22&23
27 1 2003 Treadle Hammer Safety Issue and Spring Adjustment 21,22
17 3 1993 Treadle Hammer Techniques 28-30
22 4 1998 Treadle Hammer Tongs How to make and use 19
16 3 1992 Treadle Hammer Tooling 24
12 1 1988 Treadle Hammer Update Constuction Hints 8-11
22 4 1998 Treadle Hammer, Anchoring 18
21 4 1997 Treasure Chest Padlock Making Lock & Key 24&25
27 1 2003 Trip Hammer Die Key Info for Mayer Bros Triphammers 26
16 3 1992 Trip Hammer Tips 12,13
16 3 1992 Trip HammerDies(Compound) 11
12 4 1989 Trivet Using 1 1/2" X 1/2" Chnl 16
22 4 1998 Trivet of the Month "Reuse the shoes" 13
31 2 2007 Trivet, Bennett's 22
22 2 1998 Tulip, Copper 26
6 4 1982 Twist Drill Sharpening Bit Angles/Various Metals 13
23 1 1999 Twist of the Month Two more twists 26
29 3 2005 Twist, Bikini 22
22 3 1998 Twist, Braided by Bill Fugate 7&8
30 3 2006 Twist, Chop Saw by Dr. Iron 26
4 4 1980 Twist, Corkscrew 8
16 2 1992 Twist, Rubik's 18
20 1 1996 Twisted Vine Bottle Holdr Making one for 2 bottles 16
13 4 1989 Twisting 16-21
18 4 1994 Twisting Jig, Making One Adjustable & Reversible 14
24 2 2000 Twisting Rebar 22
4 1 1980 Twisting Wrench Made from monkey wrench 13
19 3 1995 Twisting Wrench 14
29 3 2005 Twisting, A Tutorial by Bob Fredell and Tom Latane' 12 - 15
17 2 1993 Universal Bending Fork 18
18 1 1994 Universal Bending fork 26
21 4 1997 Upset Square corners 15 - 17
32 1 2008 Vee Block and Puch Design 22
31 3 2007 Vee Block, A Simple 19
3 1 1979 Village Blacksmith, The THE Poem 6
22 4 1998 Vise Fixtures, 3 different kinds How to Make Them 21
32 2 2008 Vise Stakes 20
28 4 2004 Vise Tool for Tapered Stock 27
33 1 2009 Vise tooling for holding parts One of Ollie Juaire's Designs 6,7
7 2 1983 Vise, Anvil-Based 4-6
25 3 2001 Vise, Hand Forging a Bench 6-11
4 6 1980 Vise, The Short Tutorial 2
13 4 1989 Warping, Combating 6
31 1 2007 Water as a Quenchent, Why? 10 Reason to use it 21
20 2 1996 Wax for all Seasons, A Metal finish formula&appl 5
7 3 1983 Wax Seals 5
29 4 2005 Weather Vane 17,18
15 4 1992 Weathervane Bearings 12
18 4 1994 Weathervane Letter Sizes Best sizes for viewing 11
12 4 1988 Weight of your project How to estmate steel wt. 12
24 3 2000 Welding Clamp. 3rd Hand 11
9 1 1985 Welding Pitfalls/Avoiding 10-11
17 1 1993 Welding Safety, Fumes 9,10
17 1 1993 Welding Tips and Safety 10,11
31 4 2007 Welding, Art of the Weld Puddle 20-26
5 3 1981 Well Drill Bits, Dressing 30
18 3 1994 Wheat heads 20
25 4 2001 Whirligig, Blacksmith 11
30 2 2006 Window Arch & Scrolls Design Tutorial 20,21
11 2 1987 Wine Goblet, Symetric, a 4,5
23 2 1999 Wing Nut for a Post Vise Howto make one 13
4 5 1980 Wire Bending Jig 12
12 2 1988 Wire Handled Hot Punches 14-18
16 2 1992 Wire Handled Hot Punches 20,21
17 4 1993 Wire Handled Hot Punches 15,16
11 2 1987 Wire Wheel Tips 16,17
17 1 1993 Wire Wheels & Grinders Safety Thoughts 8
28 2 2004 Wolf's Head 19
21 4 1997 Wrapped Joint 11
33 1 2009 Wrought Iron Some things about it 12-14
27 1 2003 Wrought Iron, Working 6,7
17 3 1993 Wrought Iron, Working it 23
30 2 2006 Zinc (metal) Fume Fever Death by--- 25,26
6 4 1982 Zinc Oxide Fume Fever Facts About 11
